How is the SPC floor maintained?

The maintenance of spc flooring (stone plastic composite flooring) is relatively simple due to its waterproof, wear-resistant, scratch resistant and other characteristics, but proper daily maintenance can extend its service life. Here is a detailed maintenance guide:
1、 Daily cleaning and maintenance (daily/weekly)
1. Dust removal and dry mopping

• Tools: Soft dry mop, electrostatic precipitator paper, or vacuum cleaner (using a soft bristle brush head).
• Operation: Use a dry mop or vacuum cleaner daily to remove surface dust, hair, and debris, avoiding scratches caused by gravel rubbing against the floor surface.
• Attention: It is forbidden to use a wet mop directly to mop the floor, especially at the joints where water is prone to seep in (unless the product indicates "wet mop", but it is still recommended to dry as much as possible).

• Ordinary stains (such as coffee, juice, footprints): Use a slightly damp soft cloth or sponge dipped in neutral cleaning agent (such as floor cleaning agent, mild soapy water) to wipe, and then dry with a dry cloth.
• Stubborn stains (such as crayons, oil stains, lipstick): First, gently wipe with an eraser, or dip in a small amount of alcohol or nail polish remover (avoid the paint surface), then wipe clean with water and dry.
• Taboo: Avoid using steel wire balls, hard brushes, or cleaning agents containing bleach, strong acid or alkali (such as 84 disinfectant) to prevent damage to the surface wear-resistant layer.

• 1. Neutral cleaning agent for deep cleaning
• Steps:
• Dilute neutral floor cleaner with warm water (according to the product instructions), and use a mop that is twisted until it does not drip water to evenly wipe the floor.
• Focus on cleaning dirty areas such as kitchens and doorways to avoid residue of cleaning agents.
• After cleaning, use a dry mop or towel to absorb moisture and ensure that the floor is completely dry.
• 2. Avoid direct sunlight and high temperatures
• Sunscreen: Long term exposure to sunlight can cause the floor to fade or deform. It is recommended to install curtains or blinds, especially in rooms facing south.
• High temperature prevention: Keep away from radiators and underfloor heating (normal underfloor heating temperature can be tolerated, but it is necessary to ensure that expansion joints are reserved during installation), to avoid local high temperatures causing thermal expansion and contraction deformation.

• 1. Waterproof and moisture-proof
• Daily waterproofing: Wipe off accumulated water in a timely manner (such as at the entrance of the bathroom or under the kitchen countertop) to avoid long-term soaking of the joints (although SPC is waterproof, long-term soaking may affect the adhesion of the glue).
• Wet environment: Dehumidifiers can be used during rainy season or in basements to maintain indoor humidity between 40% and 60% (high humidity can cause floor expansion and arching).
• 2. Anti scratch and anti heavy pressure
• Furniture protection: Rubber pads or soft foot pads should be installed on the legs of furniture such as tables, chairs, and sofas to avoid scratching the floor when dragging furniture; Place anti slip pads or wooden boards at the bottom of heavy objects such as pianos and bookshelves to distribute pressure.
• Pet management: Regularly trim pet nails to avoid scratching the floor with sharp claws; Pet urine needs to be cleaned immediately to prevent surface corrosion.

• 1. Reservation processing during installation
• During installation, reserve 8-10mm expansion joints between the floor, wall, and furniture to prevent thermal expansion, contraction, and arching; Cover the gaps with skirting boards at the corners of the wall.
• 2. Prohibited Behavior List

• Use a soft cloth dipped in a small amount of floor wax or furniture repair paste to wipe away minor scratches, or purchase specialized SPC floor repair agent to fill in.
• Check for local arching due to water immersion or excessive humidity, remove the arching plate, dry the ground, and re lay to ensure expansion joints.
• Clean the gaps with a toothpick or soft bristled toothbrush when dust accumulates at the seams, then use a vacuum cleaner to remove the dust and avoid rinsing with wet water.

• Dry mopping is the main method, with less water and cleaning agents: The wear-resistant layer of SPC flooring is afraid of long-term water damage and chemical corrosion, and maintaining dryness and neutral cleanliness is the key.
• Prevention is greater than repair: Reducing damage through measures such as furniture protection, sun protection, and moisture resistance is more effective than repairing afterwards.